1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Albuquerque All-on-X Hybrid (Acrylic/Titanium)

Albuquerque practices running full-arch implant protocols need a lab that can keep pace with same-day and next-day load workflows. Dani Dental accepts intraoral scans and CBCT files directly, mills the titanium substructure in-house, and layers the acrylic over a verified passive-fit bar before any case ships. No blind outsourcing, no third-party subcontract step hiding in the middle. The technician who mills the bar is the same technician who signs off on the final restoration.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Albuquerque practices running full-arch implant protocols need a lab that can keep pace with same-day and next-day load workflows. Dani Dental accepts intraoral scans and CBCT files directly, mills the titanium substructure in-house, and layers the acrylic over a verified passive-fit bar before any case ships. No blind outsourcing, no third-party subcontract step hiding in the middle. The technician who mills the bar is the same technician who signs off on the final restoration.

THE DETAIL

How we build it.

Large national-network labs route full-arch hybrid cases through centralized triage departments where no single technician owns the outcome. A case that enters the workflow on Monday may pass through four or five hands before it ships. That distribution model works at volume but it creates accountability gaps that show up as remake requests and seating surprises. Dani Dental assigns one named technician to each All-on-X hybrid case from scan review through final inspection. The technician who reviews the CBCT is the technician you call if the passive-fit check at delivery raises a question. Regional labs serving the Albuquerque market often use subcontracted milling centers for titanium bar production, then handle the acrylic layering in-house. That split workflow adds a handoff point and a communication gap between the dimensional tolerances on the bar and the occlusal specifications on the acrylic. Dani Dental mills titanium substructures and layers acrylic under the same roof, with the same technician verifying fit continuity at both steps. The result is a passive-fit rate that supports same-day or next-day load protocols without introducing the rework risk that splits-production workflows carry. For Albuquerque doctors who have experienced the churn of switching labs over price surprises or missed timelines, Dani Dental quotes hybrid cases with itemized line breakdowns before a single file is accepted. The provisional hybrid price, the bar fee, and the conversion path to a final restoration are stated up front. No procurement maze, no invoice that arrives larger than the estimate.

GETTING CASES TO US

Logistics, to the bench.

Albuquerque practices running full-arch implant protocols need a lab that can keep pace with same-day and next-day load workflows. Dani Dental accepts intraoral scans and CBCT files directly, mills the titanium substructure in-house, and layers the acrylic over a verified passive-fit bar before any case ships. No blind outsourcing, no third-party subcontract step hiding in the middle. The technician who mills the bar is the same technician who signs off on the final restoration. The acrylic/titanium hybrid format is the workhorse of full-arch implant prosthetics: repairable chairside, adjustable in-office, and mechanically forgiving enough to handle the occlusal load variation common in posterior full-arch cases. For Albuquerque doctors placing All-on-4 or All-on-6 fixtures, the provisional hybrid typically stays in service 3 to 6 months while osseointegration completes. Dani Dental builds that provisional to the same dimensional tolerances as the final restoration so conversion to zirconia or full-cast options later is a controlled handoff, not a start-over. Every case ships with the direct line of the assigned technician. If a seating question comes up chairside, the answer is one call away, not a ticket in a support queue. For Albuquerque doctors who are 4 to 6 hours from most major dental labs by road, that direct line is not a nicety; it is the practical difference between a 20-minute phone consult and a two-day delay.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for All-on-X hybrid cases from Albuquerque practices?
Dani Dental accepts STL, PLY, and OBJ scan files along with CBCT data in DICOM format. Most major intraoral scanner exports (iTero, 3Shape Trios, Medit) are compatible without conversion. If your scanner outputs a proprietary format, contact the assigned technician directly and we will confirm compatibility before the case is submitted, typically within 2 business hours.
How long does a provisional acrylic/titanium hybrid take to produce?
Standard provisional hybrid cases ship within 48 hours of receiving a complete, verified scan and CBCT file. Rush cases with confirmed same-day or next-day load protocols are accommodated on a case-by-case basis. The technician assigned to your case will confirm the production window during the initial file review call, not after the case is already in queue.
Can Dani Dental convert an existing provisional hybrid to a zirconia final restoration?
Yes. Dani Dental builds provisional acrylic/titanium hybrids to the same dimensional tolerances used in the final restoration workflow. When osseointegration is confirmed and you are ready to convert, the titanium bar data on file is used as the baseline. No new impression or full rescan is required in most cases, which reduces chair time and shortens the conversion timeline to approximately 5 to 7 business days.
How does Dani Dental handle passive-fit verification on titanium bars?
Every titanium bar is verified for passive fit against the digital model before the acrylic layer is applied. Cases that show a fit discrepancy above our internal tolerance threshold are flagged and the assigned technician contacts the submitting doctor directly before proceeding. This step happens in-house, not at a subcontracted milling center, so the technician who identifies the issue is the same one who resolves it.
What is the remake policy if a hybrid prosthetic does not seat correctly?
If a hybrid does not seat correctly due to a lab-side dimensional error, Dani Dental remakes the affected component at no charge. The assigned technician reviews the seating failure with the doctor by phone or video call, identifies whether the cause is lab-side or patient-side, and confirms the remake path within 24 hours of notification. Our lab-wide remake rate on hybrid cases is below 2.5% as of 2024-2025.
Does Dani Dental work with Albuquerque practices that are new to full-arch implant prosthetics?
Yes. If your practice is adding full-arch implant workflows for the first time, the assigned technician will walk through case submission requirements, scan protocols, and occlusal specification forms before you submit the first case. There is no onboarding fee. The goal is to make the first case go cleanly so the second one is routine, not to charge for orientation time that benefits both sides.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician