1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Albuquerque E.max Lithium Disilicate Crown

Albuquerque dentists ordering e.max lithium disilicate crowns from Dani Dental get a digital-first workflow from the first scan. Submit an intraoral scan file via your preferred scanner platform, and the case enters our design queue same day. Lithium disilicate is pressed or milled to a contour that matches your preparation, then stained and glazed by a named technician who signs off on every unit before it ships. You know exactly who built the crown and how to reach them directly.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Albuquerque dentists ordering e.max lithium disilicate crowns from Dani Dental get a digital-first workflow from the first scan. Submit an intraoral scan file via your preferred scanner platform, and the case enters our design queue same day. Lithium disilicate is pressed or milled to a contour that matches your preparation, then stained and glazed by a named technician who signs off on every unit before it ships. You know exactly who built the crown and how to reach them directly.

THE DETAIL

How we build it.

Most national-volume dental labs route Albuquerque cases through a production floor where no single technician owns the outcome end-to-end. The crown that leaves the oven may have been designed by one person, stained by a second, and quality-checked by a third who has never spoken to your office. That fragmented model is efficient at scale. It is also the most common source of shade complaints and margin remakes. Dani Dental assigns a named technician to your account. One person designs, presses, and glazes your e.max units and puts their initials on the box. If the shade reads wrong under your operatory light, you have a direct line to that person. Albuquerque has a mix of independent general dentists, multi-location DSO-affiliated practices, and a handful of prosthodontists operating near UNM's dental referral corridor on Lomas. The case mix that comes out of that environment is varied: single-unit anteriors, full-arch smile cases, implant-supported crowns where the screw channel has to thread through lithium disilicate without fracturing the material. Large national lab networks treat those as separate SKUs routed to separate departments. We handle all of them in one workflow, and the technician who presses your single-unit anterior also handles your implant crown prep so the shade family stays consistent across the case. On price transparency: Dani Dental publishes a fee schedule. You see the per-unit cost before you submit. There is no volume-tier pricing that requires a procurement conversation, no setup fee for digital submission, and no hidden rush surcharge buried in the invoice. Rush service carries a stated fee listed in the schedule. That is it.

GETTING CASES TO US

Logistics, to the bench.

Albuquerque dentists ordering e.max lithium disilicate crowns from Dani Dental get a digital-first workflow from the first scan. Submit an intraoral scan file via your preferred scanner platform, and the case enters our design queue same day. Lithium disilicate is pressed or milled to a contour that matches your preparation, then stained and glazed by a named technician who signs off on every unit before it ships. You know exactly who built the crown and how to reach them directly. The material itself earns its place in anterior and premolar restorations. At 400 MPa flexural strength, e.max handles the biting loads your patients generate while keeping the translucency that makes a lateral incisor or first premolar look natural under New Mexico light. We stock the full Ivoclar e.max ingot range and carry the low-translucency (LT), high-translucency (HT), and multi-layered (MT) options so shade matching is not a compromise. For Albuquerque cases involving adjacent veneers or an existing porcelain-fused-to-metal (PFM) environment, we note the adjacent restorations in your case file and adjust the staining protocol accordingly. Shipping to and from Albuquerque runs on a reliable 1-2 day ground window with the packaging carriers we have tested since 1993. Cases arrive protected. If there is ever a fit or shade issue, you call the technician's direct line, not a call center. We resolve the question in hours, not the 3-5 business days that call-center routing adds to the loop.

COMMON QUESTIONS

What practices ask

What scan formats does Dani Dental accept for e.max crown cases from Albuquerque?
We accept STL and PLY files from all major intraoral scanner platforms including iTero, 3Shape TRIOS, Carestream, and Medit. Upload directly through your scanner's case-sharing portal or send via our secure case submission link. No proprietary portal login is required on your end. If your scanner outputs a format you are unsure about, email our lab before submission and we will confirm compatibility within 2 business hours.
How does Dani Dental handle shade matching for e.max crowns next to existing PFM restorations?
Note the adjacent restorations and their shade on the case form, and include a photograph if the existing PFM reads unusual under your operatory light. Our technician will select the appropriate e.max translucency tier (LT, HT, or MT) and adjust the stain-and-glaze pass to account for the optical difference between lithium disilicate and metal-ceramic porcelain. If the case ships and the shade still reads off, call the technician directly for a no-call-center resolution path.
What is the turnaround time for e.max crowns shipped to Albuquerque?
Standard production is 5 business days from scan receipt. Ground shipping from our Arizona lab to Albuquerque adds 1 business day, so most Albuquerque accounts receive the case within 6 business days of submission. Rush 3-day production is available at the stated rush fee published in our fee schedule. Rush cases submitted before 10 a.m. MST enter the priority queue that same day.
Can Dani Dental fabricate e.max crowns on implant abutments for Albuquerque implant cases?
Yes. We fabricate lithium disilicate crowns on both custom titanium bases and on manufacturer-supplied abutments for most major implant systems including Nobel Biocare, Straumann, Zimmer Biomet, and Implant Direct. Specify the implant system and connection type on the case form. The named technician who builds your crown coordinates the screw-channel design so the access hole does not compromise the restoration's structural integrity.
How does Dani Dental's remake policy work if an e.max crown does not seat correctly?
If a crown does not seat due to a lab error, we remake it at no charge. Call or email the assigned technician with a description of the seating issue and a photograph of the crown on the model or in the mouth. We assess within 24 hours and confirm the remake schedule. Turnaround on a remake unit is treated as priority production. Cases where the preparation changed after the impression or scan was submitted are handled separately on a case-by-case basis.
Does Dani Dental offer a doctor kit or starter program for new Albuquerque accounts?
Yes. New accounts can request a Doctor Kit that includes shade tabs, a case submission guide formatted for our digital workflow, a printed fee schedule, and a direct contact card for your assigned technician. The kit ships free to any Albuquerque-area practice. Request it through the contact form or call the lab directly. First-case onboarding takes under 15 minutes if you already have an intraoral scanner in the operatory.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician