1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Austin Ceramic Anterior Bridge

Austin dentists working in cosmetically active practices know that anterior bridge cases live or die on shade accuracy and incisal translucency. A 3-unit bridge spanning the maxillary centrals or laterals demands ceramic layering that reads natural under both the operatory light and the patient's phone camera. At Dani Dental, every anterior ceramic bridge is built on a high-strength zirconia or e.max framework, then hand-layered by a named technician who works that case start to finish. You get one contact, one set of eyes, and full traceability on every unit.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Austin dentists working in cosmetically active practices know that anterior bridge cases live or die on shade accuracy and incisal translucency. A 3-unit bridge spanning the maxillary centrals or laterals demands ceramic layering that reads natural under both the operatory light and the patient's phone camera. At Dani Dental, every anterior ceramic bridge is built on a high-strength zirconia or e.max framework, then hand-layered by a named technician who works that case start to finish. You get one contact, one set of eyes, and full traceability on every unit.

THE DETAIL

How we build it.

Large national-network labs route anterior cases through generalist technicians on rotating shifts. There is no guarantee the ceramist who layered the first unit in a series is the same person finishing the last. At Dani Dental the named-technician model means the same set of hands builds your bridge from coping to glaze. When you call with a shade question, the technician who built the case picks up, not a customer-service rep reading notes. Regional production hubs that serve Austin from out-of-state typically quote 10-14 day turnaround on anterior ceramics because shipping adds two buffer days each direction. Our 5-7 day window is a production figure, not a marketing figure, and it applies after we confirm your scan or impression is complete and usable. If a case misses that window for any reason on our end, we contact you proactively with a revised date before the original deadline passes. On price transparency: anterior ceramic bridge pricing at Dani Dental is quoted per unit with no hidden add-ons for digital file handling, shade tabs, or pre-op consultation calls. Austin practices comparing invoices from multiple labs frequently find that line-item fees for digital workflow or custom shade work push the effective per-unit cost well above the base quote. We publish ranges, honor them, and itemize any exception before it ships.

GETTING CASES TO US

Logistics, to the bench.

Austin dentists working in cosmetically active practices know that anterior bridge cases live or die on shade accuracy and incisal translucency. A 3-unit bridge spanning the maxillary centrals or laterals demands ceramic layering that reads natural under both the operatory light and the patient's phone camera. At Dani Dental, every anterior ceramic bridge is built on a high-strength zirconia or e.max framework, then hand-layered by a named technician who works that case start to finish. You get one contact, one set of eyes, and full traceability on every unit. Austin's mix of high-expectation cosmetic patients and increasingly scan-forward dental practices means your lab partner needs to accept digital files cleanly and translate them without losing shade data. We accept STL files from all major intraoral scanners, including iTero, 3Shape TRIOS, and Medit, and we confirm scan adequacy within 4 business hours of receipt. If a scan is marginal, you hear from us before we fabricate, not after you seat. For anterior cases involving diastema closure, gingival asymmetry correction, or post-trauma replacement, we offer a complimentary digital wax-up review before milling begins. That step catches proportion errors at the design stage, where the correction costs nothing, rather than at the seat appointment, where it costs chair time and patient confidence.

COMMON QUESTIONS

What practices ask

What materials do you use for anterior ceramic bridges sent from Austin practices?
We fabricate anterior bridges primarily on high-translucency zirconia (HT or ultra-HT grade) or lithium disilicate (e.max) frameworks, chosen based on span length and esthetic demand. Three-unit anterior spans where maximum light transmission matters typically go e.max. Longer spans or cases with higher occlusal risk move to layered-over zirconia. We discuss the tradeoff with you before committing to a material.
Can you match an existing adjacent crown that was placed by a different lab?
Yes. Send us a photo of the adjacent restoration under natural light alongside the shade tab you used, plus any lab notes from the original case if available. Our ceramist will call or message you directly if the reference material is insufficient before fabrication begins. Shade-match cases involving existing restorations are flagged for senior technician review as a standard step, not an upgrade.
Do you accept digital scans from Austin offices using Medit or 3Shape TRIOS?
We accept STL files from all major intraoral scanners including Medit i700, 3Shape TRIOS, iTero Element 5D, and Carestream. Files can be shared via our secure upload portal or directly through your scanner's share function if it supports lab linking. We confirm scan adequacy within 4 business hours and flag marginal margins before milling begins, not after.
What is your turnaround time for a standard 3-unit anterior ceramic bridge?
Standard turnaround is 5-7 business days from confirmed scan or impression receipt. Cases requiring a digital wax-up review add 1 business day to that window. Rush 3-day fabrication is available for single-unit and 3-unit anterior cases with prior arrangement. Rush availability depends on current bench load and is confirmed when you submit the case, not assumed.
How does your remake policy work if the bridge does not seat or the shade is off?
If a case does not seat due to a fabrication error or the shade falls outside the agreed range, we remake it at no charge. We ask for the restoration returned with photos documenting the issue. Our internal tracking ties the remake to the named technician who built the original case, which feeds directly into our quality review process. Our remake rate across anterior ceramic cases sits below 2.5% as of 2025.
Is there a minimum order volume to work with Dani Dental as an Austin practice?
No minimum case volume is required. Solo practices sending 2-3 anterior cases per month work with us on the same terms as multi-location groups. Pricing per unit does not tier by volume for anterior ceramic bridge work. If your practice grows and case volume increases significantly, we can discuss account-level scheduling to reserve bench time during busy periods.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician