1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Dallas Implant-Supported Overdenture

Dallas practices submitting implant-supported overdenture cases to Dani Dental get a lab that works from intraoral scans or conventional impressions , your workflow, not ours. Every case starts with a verification call from the assigned technician within 4 business hours of intake, confirming implant platform, attachment preference, and occlusal targets before fabrication begins. That single step eliminates the most common source of overdenture remakes: platform mismatch discovered at insertion.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Dallas practices submitting implant-supported overdenture cases to Dani Dental get a lab that works from intraoral scans or conventional impressions , your workflow, not ours. Every case starts with a verification call from the assigned technician within 4 business hours of intake, confirming implant platform, attachment preference, and occlusal targets before fabrication begins. That single step eliminates the most common source of overdenture remakes: platform mismatch discovered at insertion.

THE DETAIL

How we build it.

Most large national lab networks route overdenture cases through a generalist bench. The technician who answers the phone is rarely the technician who built the prosthetic. At Dani Dental, each Dallas account is assigned a named technician who handles the case from prescription review through final QC. The technician's direct line ships with every case. If there is a seating question at 8 a.m. on a Thursday, you call one person who knows the case. Agency-tier lab operations typically quote implant prosthetics with attachment hardware listed as a separate procurement item , meaning the dentist coordinates with a supplier, the lab coordinates with a different supplier, and the case sits in a scheduling gap waiting for parts. Dani stocks Locator and ball attachment hardware in-house. No separate purchase order. No delay waiting on a third-party fulfillment window. The hardware is bench-tested and ships with the prosthetic. The Dobrikov family has been fabricating removable prosthetics since the Sofia practice opened in 1988, and three generations of that bench experience inform how overdenture cases are evaluated for occlusal load distribution and attachment wear tolerance. That depth doesn't show up in a national lab's turnaround metric. It shows up in the 2.5% remake rate and in the fact that Dallas clinicians on active Dani accounts average fewer than 1.2 remake requests per 10 overdenture cases submitted.

GETTING CASES TO US

Logistics, to the bench.

Dallas practices submitting implant-supported overdenture cases to Dani Dental get a lab that works from intraoral scans or conventional impressions , your workflow, not ours. Every case starts with a verification call from the assigned technician within 4 business hours of intake, confirming implant platform, attachment preference, and occlusal targets before fabrication begins. That single step eliminates the most common source of overdenture remakes: platform mismatch discovered at insertion. The prosthetic itself is built on milled acrylic or injection-molded PMMA depending on the clinical prescription, with Locator, ball, or bar-clip hardware sourced from verified suppliers and bench-tested for retention force before shipment. For Dallas clinicians restoring full-arch cases on four or six implants, we fabricate the overdenture to coordinate with any opposing arch work , including cases where we're also handling the opposing full-arch fixed hybrid on the same account. If you're working a phased treatment plan , interim denture first, overdenture conversion later , let the technician know at the initial prescription. Dani carries case files for the life of the account, so conversion cases don't start from zero. That continuity matters when a patient returns 18 months later and the original treating dentist needs a tissue-surface reline or attachment swap without pulling paper records.

COMMON QUESTIONS

What practices ask

Which implant attachment systems does Dani Dental support for overdenture cases?
Dani Dental stocks and bench-tests Locator, ball, and bar-clip retention hardware. All three systems are available without a separate procurement step. The prescribing clinician specifies the system at case submission; substitution mid-series is accommodated at no additional charge as long as the platform is compatible. Confirm platform dimensions on the prescription form at intake.
Can I submit Dallas overdenture cases using intraoral scans rather than conventional impressions?
Yes. Dani Dental accepts STL files from any major intraoral scanner. If you are transitioning from conventional impression workflow to digital, the assigned technician can walk through file-format requirements and scan-body documentation during the intake verification call. No separate software license or scanner-compatibility fee applies.
What is the standard turnaround time for an implant-supported overdenture?
Standard turnaround runs 5 to 7 business days from verified receipt of the impression or scan, assuming all attachment and platform data is confirmed at intake. Rush cases can be accommodated; confirm availability at submission. Turnaround begins the business day after the technician verification call closes, not the calendar day the package arrives.
How does Dani Dental handle phased treatment plans where an interim denture converts to an overdenture later?
Case files are retained for the life of the account. When a Dallas patient returns for overdenture conversion 12 or 18 months after an interim denture, the assigned technician pulls the existing records rather than starting from a blank prescription. This applies to tissue-surface relines and attachment swaps as well. No fee is charged for file retrieval on active accounts.
What remake rate should Dallas clinicians expect on overdenture cases?
Internally tracked across named-technician case logs over the trailing 12 months, Dani Dental's overdenture remake rate runs below 2.5%. The primary driver of that number is the technician verification call at intake, which catches platform mismatches and attachment selection conflicts before fabrication begins rather than at the insertion appointment.
Does Dani Dental fabricate implant-supported overdentures to coordinate with opposing full-arch fixed hybrids?
Yes. For Dallas cases where Dani is handling both arches, the technician coordinates occlusal targets across the overdenture and the opposing fixed hybrid during the same prescription review. For cases where the opposing arch was fabricated by a different lab, submit the opposing prosthetic dimensions or a bite record with the overdenture prescription and the technician will reconcile prior to fabrication.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician