1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Denver Mandibular Advancement Device

Denver dentists prescribing mandibular advancement devices for snoring and mild-to-moderate obstructive sleep apnea need a lab that treats these cases with the same precision applied to fixed restorations. Dani Dental fabricates MADs from high-durometer thermoplastic and hard acrylic bilaminates, with titration hardware calibrated to your prescribed advancement range. Every device ships with a written advancement protocol and the direct line of the technician who built it.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Denver dentists prescribing mandibular advancement devices for snoring and mild-to-moderate obstructive sleep apnea need a lab that treats these cases with the same precision applied to fixed restorations. Dani Dental fabricates MADs from high-durometer thermoplastic and hard acrylic bilaminates, with titration hardware calibrated to your prescribed advancement range. Every device ships with a written advancement protocol and the direct line of the technician who built it.

THE DETAIL

How we build it.

Most national-network labs route MAD cases through a generalist removables queue where sleep appliances compete for bench time with full dentures, partials, and night guards. The result is a device that meets minimum spec but reflects no particular expertise. Dani Dental separates sleep appliance fabrication as its own workflow, with technicians who specialize in the advancement mechanism and titration hardware rather than treating the MAD as an afterthought. Communication is the other gap Denver dentists consistently flag when they switch labs. A typical large-volume lab gives you a case number and a generic status portal. We give you the direct line of the technician on your case. Questions about advancement range, material selection, or a patient with a limited vertical get answered in hours, not routed through a ticket system that resolves in two to four days. That speed matters when a patient is scheduled for a delivery appointment you cannot move. On price: we publish material and hardware tier pricing upfront. Hard acrylic bilaminates with Herbst-style hardware, EMA connectors, or dorsal-fin titration are each listed with a flat lab fee. No procurement maze, no line-item surprises at invoice. Practices that have run side-by-side cost comparisons with agency-tier national labs report equivalent or lower all-in cost once remake and adjustment cases are factored in.

GETTING CASES TO US

Logistics, to the bench.

Denver dentists prescribing mandibular advancement devices for snoring and mild-to-moderate obstructive sleep apnea need a lab that treats these cases with the same precision applied to fixed restorations. Dani Dental fabricates MADs from high-durometer thermoplastic and hard acrylic bilaminates, with titration hardware calibrated to your prescribed advancement range. Every device ships with a written advancement protocol and the direct line of the technician who built it. At altitude, Denver patients often present with comorbid respiratory concerns that make appliance compliance critical. That means fit tolerances matter more, not less. We work from intraoral scans (accepted from any major scanner format) or high-accuracy PVS impressions, and we use a centric relation bite registration workflow that reduces chairside adjustment time. If a practice submits a poorly seated bite, we flag it before fabrication rather than guess. For practices running high MAD volume, we offer a dedicated account contact who tracks case status in real time and can confirm turnaround windows at the time of submission. Rush cases reaching us by noon Mountain Time ship in 3 business days at no markup for established accounts.

COMMON QUESTIONS

What practices ask

What impression or scan formats do you accept for MAD fabrication?
We accept STL files from any major intraoral scanner, including iTero, 3Shape TRIOS, Carestream, and Medit. For practices still working with physical impressions, we accept PVS and polyether in standard perforated or rim-lock trays. We request a centric relation bite registration with every case. If you submit in CR wax or a George Gauge record, note that on the Rx so the technician calibrates accordingly.
Which titration hardware options are available?
Current hardware options include Herbst-style telescoping rods, EMA elastic connectors in eight resistance grades, dorsal-fin advancement screws in 0.25 mm increment blocks, and fixed-position acrylic protrusive splints for patients who tolerate no titration. We stock all four in-house. If your patient needs a specific connector system from a named manufacturer, note it on the Rx and we will source it or advise on the closest equivalent.
What is the standard turnaround for a Denver-area practice?
Standard turnaround is 5 business days from the date we receive an approved scan or a dimensionally accurate PVS impression. Rush cases submitted by noon Mountain Time on any business day ship in 3 business days at no markup for practices with an active account. We confirm turnaround at the time of case acceptance, not at the end of the queue.
How do you handle a remake if the device does not seat correctly at delivery?
If a device does not seat due to a lab error in fabrication, we remake it at no charge and expedite the return. If the issue traces to an inaccurate impression or a bite that shifted before pour, we will discuss the case with you directly rather than issue a flat denial. Our remake rate lab-wide is below 2.5%, and we track every remake by cause so technicians can identify patterns in their own work.
Can you fabricate MADs for patients with significant periodontal bone loss or missing posterior teeth?
Yes, with some design adjustments. Missing posterior teeth affect retention and advancement load distribution, so we typically switch to a full-coverage hard acrylic base with embedded retention rather than a thermoplastic bilaminate. Significant bone loss affects the bite registration more than the appliance design itself. Flag these cases on the Rx and the assigned technician will call or email with a design recommendation before fabricating.
Does Dani Dental work with Denver practices billing MADs through medical insurance?
We provide a detailed lab invoice with ADA procedure codes and material descriptions suitable for supporting a medical insurance claim under HCPCS code E0486 or equivalent. We do not bill insurers directly, as that is the practice's workflow. We can include documentation of device type, advancement mechanism, and material spec on request, which some Denver practices use as supporting documentation for prior authorization submissions.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician