1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Denver CAD/CAM Milled Restoration

Denver dental practices operate in a market where patients are mobile, schedules are dense, and chair-time losses from remakes are felt fast. Dani Dental's CAD/CAM milled restoration workflow is built around digital intake: intraoral scans (.STL, .PLY, or scanner-native formats) accepted directly, no PVS impression required unless you prefer it. Every case is designed in-house using full-contour CAD software before being milled from manufacturer-certified zirconia, lithium disilicate, or PMMA blocks depending on clinical indication.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Denver dental practices operate in a market where patients are mobile, schedules are dense, and chair-time losses from remakes are felt fast. Dani Dental's CAD/CAM milled restoration workflow is built around digital intake: intraoral scans (.STL, .PLY, or scanner-native formats) accepted directly, no PVS impression required unless you prefer it. Every case is designed in-house using full-contour CAD software before being milled from manufacturer-certified zirconia, lithium disilicate, or PMMA blocks depending on clinical indication.

THE DETAIL

How we build it.

Most national-network labs route Denver cases through centralized production queues where no single technician owns the outcome. A remake request re-enters the same anonymous queue. Dani Dental assigns a named technician to each Denver account at onboarding. That technician's direct line is printed on every case slip. If a shade is off or a contact is tight, you call the person who milled it, not a general customer service line. Response time is measured in hours, not days. Agency-tier labs that service the Denver market often compete on price alone, and the tradeoff shows: inconsistent marginal accuracy, variable glazing quality, and no continuity between cases. Dani holds a documented remake rate below 2.5% across milled-restoration volume. That number is not a marketing figure; it is pulled from internal case tracking and available on request. For a Denver practice placing 20 to 30 milled units per month, a sub-2.5% remake rate translates directly to recovered chair time and fewer same-day schedule disruptions. The Dobrikov family has been producing restorations since Sofia in 1988 and in Arizona since 1993. Three generations have worked the bench. That history is not the pitch; the precision it produces is. When a Denver clinician sends a scan, it is reviewed by a technician with institutional knowledge that no 18-month-old AI-only milling service has accumulated. Digital workflow and human craft are not in opposition at Dani. They are sequential steps in the same quality protocol.

GETTING CASES TO US

Logistics, to the bench.

Denver dental practices operate in a market where patients are mobile, schedules are dense, and chair-time losses from remakes are felt fast. Dani Dental's CAD/CAM milled restoration workflow is built around digital intake: intraoral scans (.STL, .PLY, or scanner-native formats) accepted directly, no PVS impression required unless you prefer it. Every case is designed in-house using full-contour CAD software before being milled from manufacturer-certified zirconia, lithium disilicate, or PMMA blocks depending on clinical indication. For Denver restorative cases, the standard material mix leans toward high-translucency multilayer zirconia for posterior full-arch work and lithium disilicate for anterior and premolar cases where esthetic gradient matters. Dani's technicians hand-characterize every anterior case before glazing. Posterior monolithic restorations ship fully polished or glazed per your standing preference. You set the protocol once during onboarding; it stays on file. Shipping logistics from Dani Dental's Arizona production facility to Denver typically run one business day via overnight courier. That means a five-day total turnaround lands a finished restoration at your front desk six days after scan submission. For practices near the Denver Tech Center, RiNo, or Cherry Creek corridors with high elective caseloads, that cycle supports same-week seating on most single-unit milled cases.

COMMON QUESTIONS

What practices ask

What digital scan formats does Dani Dental accept for Denver milled-restoration cases?
Dani accepts .STL, .PLY, and most scanner-native file formats including exports from 3Shape Trios, Carestream CS, and iTero systems. Files can be submitted via the secure case portal or direct upload link provided at onboarding. Traditional PVS or polyether impressions are also accepted if your workflow requires them; the lab pours and scans in-house at no additional fee.
What materials are available for milled restorations shipped to Denver?
Standard options include high-translucency multilayer zirconia (3Y through 5Y), lithium disilicate (e.max-compatible), full-contour PMMA for provisionals, and hybrid ceramic for specific load-bearing indications. Material selection is confirmed during case design; your account technician flags any biomechanical concerns before milling begins, not after delivery.
How does the 3-day rush turnaround work for Denver practices?
Rush cases submitted via digital scan before 10 a.m. Mountain Time enter the accelerated production queue the same day. Single-unit posterior and anterior milled restorations in standard materials qualify. Multi-unit bridges and cases requiring custom shade matching or hand layering may need an additional 24 hours. Rush availability is confirmed by your technician within two hours of submission.
What is the remake policy if a Denver case requires adjustment after seating?
If a remake is needed due to a lab-side fit, shade, or fabrication issue, Dani remakes the restoration at no charge and prioritizes it in the production queue. Your named technician is notified directly and reviews the original scan and design file before the case is re-entered. Documented remake rate across milled restorations is below 2.5% as of 2024-2025 production data.
Can Denver practices set standing shade and staining preferences to avoid specifying them case by case?
Yes. During account onboarding, your technician documents your preferred shade system (Vita Classical, Vita 3D-Master, or custom), glazing protocol, surface texture preference, and contact tightness standard. Those preferences are stored in your account profile and applied to every case automatically unless you flag an override at submission. This eliminates the most common source of back-and-forth on routine restorative cases.
Is there a minimum case volume requirement to open a Denver account with Dani Dental?
No minimum volume is required to open an account. Practices placing two to five units per month receive the same named-technician assignment and turnaround windows as higher-volume accounts. Pricing is transparent and provided in full during the onboarding call, with no procurement process or tiered access model standing between your first case and production.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician