1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Goodyear Porcelain-Fused-to-Metal Crown

Porcelain-fused-to-metal crowns remain a workhorse in posterior and high-load restorations. For practices in Goodyear serving a patient base that skews active and practically minded, PFM delivers a ceramic aesthetic over a cast-metal substructure that holds up under real occlusal demands. The metal coping, whether high-noble, noble, or base metal per your prescription, gives you a margin fit that full-ceramic cases occasionally can't match on preparation geometries that aren't ideal.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Porcelain-fused-to-metal crowns remain a workhorse in posterior and high-load restorations. For practices in Goodyear serving a patient base that skews active and practically minded, PFM delivers a ceramic aesthetic over a cast-metal substructure that holds up under real occlusal demands. The metal coping, whether high-noble, noble, or base metal per your prescription, gives you a margin fit that full-ceramic cases occasionally can't match on preparation geometries that aren't ideal.

THE DETAIL

How we build it.

Most national-volume labs route PFM cases through a production line where no single technician owns the outcome. A case comes in, gets split across departments, and ships without a name attached to it. When a margin is off or the porcelain shade reads warm under operatory light, the conversation is with a customer service rep, not the person who built it. That model works at scale; it does not work when your Goodyear patient is back in the chair in four days. Dani Dental assigns a named technician to each account. Every PFM crown that leaves our facility has a direct-line contact attached to the case paperwork. If you need to discuss a prep photo before we cut the die, that call takes minutes, not a support ticket. Our metal-ceramic bond protocol follows ISO 9693 testing standards, and porcelain application is done by technicians with more than a decade of bench time on PFM specifically, not cross-trained on whichever product category is backed up that week. For Goodyear practices, the practical difference shows up in chair time. A crown that seats the first time, margins that close, and shade that matches the adjacent dentition without a second appointment. We track our remake rate across active accounts. It runs below 2.5%. That number is the honest differentiator, not a tagline.

GETTING CASES TO US

Logistics, to the bench.

Porcelain-fused-to-metal crowns remain a workhorse in posterior and high-load restorations. For practices in Goodyear serving a patient base that skews active and practically minded, PFM delivers a ceramic aesthetic over a cast-metal substructure that holds up under real occlusal demands. The metal coping, whether high-noble, noble, or base metal per your prescription, gives you a margin fit that full-ceramic cases occasionally can't match on preparation geometries that aren't ideal. Dani Dental handles the full fabrication sequence in-house. Die trimming, wax-up, casting, porcelain build, and characterization are done by named technicians, not routed through a third-party offshore facility. When your Goodyear patients present with bruxing habits or heavier bite forces, that matters. You're not guessing who built the case or whether the porcelain-to-metal bond protocol was followed. We accept intraoral scans (STL files from any major scanner platform) and traditional PVS impressions. Goodyear practices that have moved to full digital workflows get the same turnaround as impression-based cases: 5 business days standard, with 3-business-day rush available on request. Prescription forms, alloy selection, and shade guidance are all handled directly with your assigned technician.

COMMON QUESTIONS

What practices ask

What alloy options does Dani Dental offer for PFM crowns?
We fabricate PFM crowns in high-noble, noble, and base metal alloys. Your prescription specifies the alloy; if you have a preference driven by patient allergy history or your standard protocol, note it on the case form and your technician will confirm before casting. High-noble is the default for anterior cases unless you specify otherwise.
Do you accept intraoral scans from Goodyear practices, or do I need to send a physical impression?
Both work. We accept STL files from all major intraoral scanner platforms including iTero, 3Shape TRIOS, and Carestream. Upload through our secure case portal or email directly to your assigned technician. Physical PVS impressions ship to our Arizona facility and receive the same 5-business-day turnaround.
What is your standard turnaround for a PFM crown shipped to a Goodyear practice?
Standard turnaround is 5 business days from the day we receive a usable impression or scan file. Rush cases, 3 business days, are available; flag that on your prescription form before submission. Cases requiring prep modification photos or shade consultations may add one day to either window.
How do I handle a shade that reads off when I seat the crown?
Call or text your named technician directly. The direct line is included on every case packing slip. Shade remakes driven by a build error on our end are covered without a remake fee. We ask for a photo of the adjacent dentition under your operatory light so we can document the deviation and adjust the build parameters for your next case.
Can PFM crowns still be prescribed for anterior cases, or should I default to full-ceramic?
PFM remains appropriate for anterior restorations when margin placement requires subgingival depth that complicates all-ceramic fit, or when the patient has a parafunctional habit that puts full-ceramic at fracture risk. The aesthetic outcome depends heavily on the porcelain application; our anterior PFM cases go to technicians who specialize in cervical characterization, not general-line production staff.
Does Dani Dental work with Goodyear practices that are new accounts, or do you prioritize existing volume accounts?
New Goodyear accounts receive the same named-technician assignment and turnaround commitments as existing accounts from day one. There is no minimum monthly volume requirement to open an account. A Doctor Kit with case forms, alloy selection guides, and shipping materials can be requested through the website and typically arrives within 3 business days.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician