1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Goodyear 3D-Printed Restoration

Goodyear practices running high-volume restorative workflows need a lab that moves at the same pace. Our 3D-printed restoration service starts the moment you send an intraoral scan or STL file. No polyvinyl impressions sitting in a shipping box for two days. The digital file routes directly into our print queue, where resin selection and support placement are handled by technicians with experience in both full-arch and single-unit cases.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Goodyear practices running high-volume restorative workflows need a lab that moves at the same pace. Our 3D-printed restoration service starts the moment you send an intraoral scan or STL file. No polyvinyl impressions sitting in a shipping box for two days. The digital file routes directly into our print queue, where resin selection and support placement are handled by technicians with experience in both full-arch and single-unit cases.

THE DETAIL

How we build it.

National production labs running high-volume print operations optimize for throughput. That means standardized material selections, tiered support queues, and a customer-service layer that sits between you and the person who actually built your case. Dani Dental is structured differently: one technician owns a case start to finish, their name goes on the packing slip, and their direct line is on the delivery note. Where large-network lab pricing looks competitive on the invoice, the hidden cost is chair-time lost to remakes and back-and-forth clarifications. Our stated remake rate target is under 2.5 percent across all printed units. That is the number we hold ourselves to, and it is the number Goodyear doctors should ask any lab to show in writing before committing volume. We also do not require you to adopt a proprietary scan-submission portal. STL, OBJ, and direct intraoral scan exports from the major scanner systems all route cleanly into our intake workflow. No format conversion fees, no compatibility surprises. For a practice in Goodyear that has already invested in its own digital capture technology, the lab should adapt to your stack, not the other way around.

GETTING CASES TO US

Logistics, to the bench.

Goodyear practices running high-volume restorative workflows need a lab that moves at the same pace. Our 3D-printed restoration service starts the moment you send an intraoral scan or STL file. No polyvinyl impressions sitting in a shipping box for two days. The digital file routes directly into our print queue, where resin selection and support placement are handled by technicians with experience in both full-arch and single-unit cases. Printed restorations from Dani Dental include temporaries, long-term provisionals, surgical guides, and select final restorations in high-strength resin. Each unit is post-processed, finished, and quality-checked by the same technician who ran the print. That matters when your chair is booked back-to-back and a redo is a half-day scheduling problem. You receive the technician's direct contact line with every case, not a general inbox. For Goodyear offices that have grown alongside the Palm Valley corridor and the newer Estrella Mountain corridors, the volume of restorative cases has climbed steadily. We handle that ramp without minimum-case requirements. Whether you send us four cases a month or forty, the file-to-finish workflow is identical.

COMMON QUESTIONS

What practices ask

What file formats do you accept for 3D-printed restoration cases from Goodyear offices?
We accept STL, OBJ, and direct scan exports from the major intraoral scanner platforms used in Arizona practices. Files come in through our secure intake portal or via direct upload link. No proprietary format is required, and there are no conversion fees. If your scanner outputs a format you are unsure about, call us before the appointment, not after.
How long does a standard 3D-printed single-unit restoration take from scan to delivery?
Our current baseline for single-unit printed restorations is 5 business days from confirmed file receipt. Rush cases with 48-hour turnaround are available for select restoration types; ask your assigned technician at intake. Turnaround is counted from the moment a clean, complete file clears quality check, not from the time the email lands in our inbox.
What types of 3D-printed restorations does Dani Dental produce?
We produce temporaries, long-term provisionals, diagnostic wax-ups rendered in resin, surgical guides, and select final restorations in high-strength biocompatible resin. For final-unit cases, material selection depends on span length, occlusal load, and esthetic zone placement. Your assigned technician will flag any case where a milled or pressed alternative would perform better before it goes to print.
Do you require a minimum case volume for Goodyear practices to use your 3D-print service?
No minimum case volume is required. Goodyear practices sending four cases a month and those sending forty-plus use the identical intake and production workflow. The only thing that changes at higher volume is that we can discuss a standing scheduling block so your cases hit the print queue first thing each morning.
How does named-technician accountability work for printed cases?
Every case is assigned to one technician at intake. That technician handles file review, support placement, print parameters, post-processing, and final quality check. Their name appears on your packing slip and their direct contact number is included with the delivery. If you have a question or a concern about fit after seating, you reach the person who built it, not a general support queue.
Can 3D-printed restorations be used as part of a full-arch or All-on-X case workflow?
Yes. Printed long-term provisionals are a standard part of full-arch implant workflows, providing the patient with a functional and esthetic temporary while final prosthetics are fabricated. Dani Dental handles both the printed provisional stage and the final prosthetic in-house, so the transition between stages uses the same case file, the same technician, and the same bite records without starting over.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician