1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Oklahoma City E.max Lithium Disilicate Crown

Oklahoma City dentists prescribing e.max lithium disilicate crowns get the full range of fabrication options through Dani Dental: monolithic pressed e.max for posterior load-bearing cases, cut-back and layered e.max for anterior esthetics where translucency and characterization matter, and CAD-milled IPS e.max CAD blocks for high-volume digital workflows. Each path uses IPS e.max ingots or blocks from Ivoclar's current generation materials, not warehouse surplus, which matters when you need predictable shade matching across a multi-unit case.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Oklahoma City dentists prescribing e.max lithium disilicate crowns get the full range of fabrication options through Dani Dental: monolithic pressed e.max for posterior load-bearing cases, cut-back and layered e.max for anterior esthetics where translucency and characterization matter, and CAD-milled IPS e.max CAD blocks for high-volume digital workflows. Each path uses IPS e.max ingots or blocks from Ivoclar's current generation materials, not warehouse surplus, which matters when you need predictable shade matching across a multi-unit case.

THE DETAIL

How we build it.

Most Oklahoma City-area dental practices choosing a lab face a binary that does not have to exist: national-volume labs with fast turns but no direct technician contact, or local one-person operations with personal service but limited digital capability. Dani Dental runs neither model. The lab operates on a digital-first production floor with 3Shape DOF scanners and milling equipment for e.max CAD cases, combined with an IPS e.max press workflow for monolithic and layered pressed restorations. You get national-lab production infrastructure with the communication structure of a boutique shop. The communication difference is specific, not a marketing promise. Every e.max case shipped to an Oklahoma City account includes the direct line of the technician who fabricated it. If a crown seats 48 hours after delivery and there is a proximal contact question, you call the person who pressed or milled the crown, not a general support queue. Response within 4 business hours is the standard. That single accountability structure is why the remake rate stays under 2.5%, because problems surface before seating rather than after. On the value side, Dani Dental's e.max crown pricing is quoted per case at time of prescription, not subject to a procurement tier system or annual contract renegotiation. Oklahoma City practices ordering five crowns or fifty crowns in a month see the same unit price. For high-esthetic cases where the doctor wants pre-seating photos or a shade consultation before the crown ships, that service is included, not billed as an add-on. Chair time saved on remakes and shade remakes is real overhead reduction, and that is where the lab relationship pays for itself inside 90 days for most active accounts.

GETTING CASES TO US

Logistics, to the bench.

Oklahoma City dentists prescribing e.max lithium disilicate crowns get the full range of fabrication options through Dani Dental: monolithic pressed e.max for posterior load-bearing cases, cut-back and layered e.max for anterior esthetics where translucency and characterization matter, and CAD-milled IPS e.max CAD blocks for high-volume digital workflows. Each path uses IPS e.max ingots or blocks from Ivoclar's current generation materials, not warehouse surplus, which matters when you need predictable shade matching across a multi-unit case. The prescription process for Oklahoma City accounts is straightforward. Intraoral scanner files (iTero, 3Shape Trios, Medit, or CEREC) upload directly to Dani Dental's case portal. Physical PVS or polyether impressions ship overnight to the Arizona lab. Either way, a named technician picks up your case and holds it through seating. No hand-off chain where information drops between intake and the bench. For practices in Oklahoma City handling a mix of restorative and esthetic cases, e.max crowns sit in a useful middle position: flexural strength around 400 MPa pressed (up to 530 MPa for e.max CAD LT blocks), which covers most single-unit posterior indications outside heavy bruxers, while the optical depth of lithium disilicate reads far more natural under operatory light than full-contour zirconia. If the case leans bruxer or full-arch loading, the technician flags it before fabrication and recommends the appropriate zirconia tier, not after you've seated and the patient calls back.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for e.max crown cases from Oklahoma City practices?
The case portal accepts STL and PLY files from any major intraoral scanner, including iTero, 3Shape Trios, Medit i700, and CEREC Primescan. If your scanner exports a proprietary format, contact the lab before your first case submission and the team will confirm compatibility or provide a conversion path. Physical PVS impressions ship overnight to the Arizona facility using Dani Dental's provided prepaid label program.
When is pressed e.max the right choice versus milled e.max CAD for a posterior crown?
Pressed IPS e.max (LT or HT ingots) is preferred for cut-back and layered cases requiring high esthetic depth, and for monolithic posterior crowns where the occlusal anatomy benefits from pressing flow. Milled e.max CAD suits high-volume same-day or next-day digital workflows and cases where the CBCT or scan data drives a precise occlusal design. The assigned technician reviews every prescription and flags the optimal path before fabrication begins, not after.
What is the standard turnaround for e.max crowns to Oklahoma City?
Standard turnaround is 5 business days from accepted scan upload or confirmed physical impression receipt at the Arizona lab. A 3-business-day rush option is available on most single-unit cases. Multi-unit cases (three or more units) and cases requiring pre-seating shade photos are quoted individually at prescription time, typically 6 to 7 business days standard.
Can e.max crowns be used on implant abutments for Oklahoma City patients?
Yes, with case-specific review. IPS e.max crowns seat on custom titanium or zirconia abutments for single-unit implant restorations in non-heavy-parafunction cases. The technician reviews the opposing occlusion, implant position, and loading class at prescription. Cases with confirmed bruxism, steep posterior loading angles, or full-arch implant frameworks are redirected to the appropriate zirconia or hybrid material tier before any fabrication occurs.
How does shade matching work for multi-unit e.max cases across an Oklahoma City practice?
For multi-unit e.max cases, the assigned technician requests pre-op shade photos taken under consistent lighting (no operatory light overhead, natural or flash against a neutral background). The lab can accommodate Vita Classical and Vita 3D-Master shade designations. Pre-seating photos of the finished crowns are included at no additional fee for cases of three or more units, giving the prescribing doctor a visual checkpoint before the case ships from Arizona.
What happens if an e.max crown needs to be remade after delivery?
Contact the named technician directly using the number included with your delivery. Remake requests are reviewed within 4 business hours. If the remake falls within Dani Dental's defined prescription-accuracy criteria, fabrication begins immediately at no charge. The remake rate across all e.max cases runs below 2.5% over the trailing 12 months. When a remake is needed, the same technician who built the original holds the remake case through completion.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician