1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Phoenix Mandibular Advancement Device

Phoenix practices dealing with sleep-disordered breathing referrals need an appliance lab that understands titration mechanics, not just the acrylic. Dani Dental fabricates mandibular advancement devices using precise bite registration protocols, with each device calibrated to the advancement dimension your clinic specifies. We work with digital intraoral scans or traditional PVS impressions, so practices that haven't fully moved to digital workflow are not disadvantaged.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Phoenix practices dealing with sleep-disordered breathing referrals need an appliance lab that understands titration mechanics, not just the acrylic. Dani Dental fabricates mandibular advancement devices using precise bite registration protocols, with each device calibrated to the advancement dimension your clinic specifies. We work with digital intraoral scans or traditional PVS impressions, so practices that haven't fully moved to digital workflow are not disadvantaged.

THE DETAIL

How we build it.

Most national-volume labs processing MADs in bulk treat the appliance as a commodity unit. The device ships, the technician's name never appears on any documentation, and when fit questions arise post-delivery your front desk is calling a general support line. Dani Dental routes every Phoenix MAD through a single technician owner for that case. That technician's direct line is on the delivery slip. Questions get answered in hours, not queued for the next business cycle. The three-generation bench history behind Dani, stretching from Sofia in 1988 through Arizona operations from 1993 onward, means the technicians here have built removable appliances across every era of material and protocol evolution. That depth shows in how edge cases get handled: unusual jaw geometry, patients with previous MAD failure, practices requesting non-standard advancement increments. These are not escalation tickets. They are handled at the bench level. On price, we do not run a procurement maze. Phoenix practices get quoted a flat per-unit rate with no surprise add-ons for digital file handling or articulator mounting. For practices sending 10 or more MAD cases per quarter, ask about the standing-case rate during your first consultation call. Transparent pricing paired with a sub-2.5% remake rate is the value structure. Chair-time saved on remakes and re-cement appointments is the arithmetic that makes it work.

GETTING CASES TO US

Logistics, to the bench.

Phoenix practices dealing with sleep-disordered breathing referrals need an appliance lab that understands titration mechanics, not just the acrylic. Dani Dental fabricates mandibular advancement devices using precise bite registration protocols, with each device calibrated to the advancement dimension your clinic specifies. We work with digital intraoral scans or traditional PVS impressions, so practices that haven't fully moved to digital workflow are not disadvantaged. The Greater Phoenix metro includes a dense concentration of sleep medicine physicians, ENT groups, and dental practices operating formal DSM (dental sleep medicine) programs. That clinical environment demands appliances with consistent fit tolerances and clear titration range documentation. Every MAD we ship includes a written fit-note from the technician who built it, with direct contact information and the advancement specification on record. For group practices and DSO-affiliated offices across Maricopa County, we handle volume orders without deprioritizing individual case QC. A Peoria DSO location and a boutique Arcadia sleep practice receive the same named-technician accountability on every case. That consistency is structural, not aspirational.

COMMON QUESTIONS

What practices ask

What bite registration format do you require for Phoenix MAD cases?
We accept George Gauge bite registrations, leaf gauge captures, and digital bite scans exported from any major intraoral scanner (iTero, Trios, Medit). The key data point is the verified protrusion dimension your practice has established. If your Phoenix office is transitioning between analog and digital workflows, call us before the first case and we will walk through the preferred submission format together. Turnaround does not change based on submission type.
Which MAD designs do you fabricate?
We build monobloc and titratable two-piece designs. For titratable devices we fabricate to EMA, Herbst-style, and practice-specified custom configurations. If your Phoenix sleep protocol calls for a specific advancement range or hardware component, specify it on the case form. Our technician will confirm the specification before fabrication begins, not after the appliance arrives at your clinic.
How do you handle cases where the initial fit requires adjustment?
Any Phoenix MAD case with a fit issue within 30 days of delivery is evaluated at no remake charge, provided the original bite registration and advancement spec were submitted correctly. The named technician on the original case reviews the returned appliance directly. Remakes due to patient non-cooperation or post-delivery modification by another party fall outside that window, but those situations are assessed individually.
Can Phoenix group practices or DSO locations set up recurring MAD case accounts?
Yes. Maricopa County DSO locations and multi-location group practices can establish standing case accounts with a single billing contact and per-location case tracking. Practices submitting 10 or more MAD cases per quarter qualify to discuss a standing-case rate. Contact us through the Doctor Kit inquiry form to start the account setup conversation. Account initialization typically completes within 48 hours.
Do you accept intraoral scan files for MAD fabrication, and which file types?
We accept STL and PLY files from all major scanner platforms. If your Phoenix practice exports in a proprietary format, convert to STL before submission or contact us and we will confirm compatibility with your specific scanner model. Digital case submission through our portal logs a timestamped receipt confirmation, which starts the 5-to-7-business-day fabrication clock immediately on approval.
What is the communication process during fabrication for a Phoenix MAD case?
Case receipt confirmation arrives within one business day of impression or scan delivery. If the technician identifies a question about the bite registration or advancement spec, you hear from that specific technician by phone or email before fabrication proceeds. No cases move forward on assumptions. The same technician who flags the question builds the device, so nothing is lost in translation between departments.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician