1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Phoenix CAD/CAM Milled Restoration

Phoenix dentists sending milled-restoration cases to Dani Dental get a fully digital workflow from scan acceptance to seated crown. The lab accepts STL files from any major intraoral scanner , iTero, Primescan, TRIOS , and routes each case through in-house CAD design before milling in monolithic zirconia, layered zirconia, or IPS e.max. No outsourced milling centers in a separate state, no relay handoffs that add days. The design file is reviewed by the assigned technician before the block goes to the mill, which is the step most high-volume production labs skip.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Phoenix dentists sending milled-restoration cases to Dani Dental get a fully digital workflow from scan acceptance to seated crown. The lab accepts STL files from any major intraoral scanner , iTero, Primescan, TRIOS , and routes each case through in-house CAD design before milling in monolithic zirconia, layered zirconia, or IPS e.max. No outsourced milling centers in a separate state, no relay handoffs that add days. The design file is reviewed by the assigned technician before the block goes to the mill, which is the step most high-volume production labs skip.

THE DETAIL

How we build it.

Most national-network labs serving the Phoenix market operate at scale by separating design from fabrication: a centralized CAD team designs the restoration, a remote milling facility cuts it, and the case ships through a distribution hub. That model works at volume but loses the check that matters most , a technician who sees the design and the finished unit together. Dani keeps both steps under the same roof, with the same named technician accountable for both. Agency-tier dental labs often compete on price per unit by standardizing material defaults and limiting shade options. Dani does not publish a price list that pressures material choice. Instead, the case submission form captures the clinical scenario first , restoration type, position, opposing dentition, patient esthetic demands , and material recommendation follows from there. Clinicians in Phoenix who have switched over for this reason cite fewer phone calls after delivery as the clearest operational difference. The remake policy is straightforward: if a Dani-milled restoration does not seat, fits outside spec, or misses agreed shade, the lab remakes it at no charge and expedites return shipping. That commitment is not buried in a terms document. It is stated on the case confirmation every Phoenix account receives before production starts.

GETTING CASES TO US

Logistics, to the bench.

Phoenix dentists sending milled-restoration cases to Dani Dental get a fully digital workflow from scan acceptance to seated crown. The lab accepts STL files from any major intraoral scanner , iTero, Primescan, TRIOS , and routes each case through in-house CAD design before milling in monolithic zirconia, layered zirconia, or IPS e.max. No outsourced milling centers in a separate state, no relay handoffs that add days. The design file is reviewed by the assigned technician before the block goes to the mill, which is the step most high-volume production labs skip. For Phoenix practices running same-day or next-day protocols, Dani also accepts rush cases with a stated 72-hour turnaround for single-unit restorations when the scan clears by 10 a.m. Mountain time. Every case ships with the direct phone line of the technician who designed it. Questions about shade, emergence profile, or occlusal contacts go to that person , not a general support queue. The response window is same business day, not 24-to-48 hours. Material selection is matched to the clinical scenario, not defaulted to the cheapest block in inventory. High-translucency zirconia for anterior cases, high-strength monolithic for posterior load-bearing, layered options when esthetic demands are exacting. Dani's technicians will flag a material mismatch before the case goes to production, not after delivery.

COMMON QUESTIONS

What practices ask

Which intraoral scanners does Dani Dental accept for Phoenix milled-restoration cases?
Dani accepts STL files from all major intraoral scanners including iTero, Primescan, TRIOS, and 3Shape TRIOS variants. If your scanner exports a standard open STL, the file routes directly into the CAD queue. For Phoenix practices still on impression-based workflows, the lab accepts PVS impressions and pours in-house before scanning , no separate impression-scanning fee applies to existing accounts.
What is the standard turnaround for a milled zirconia crown from a Phoenix practice?
Standard turnaround is 5 business days from scan acceptance to delivery for single-unit milled zirconia and IPS e.max cases. Rush cases submitted before 10 a.m. Mountain time qualify for a 72-hour turnaround on single units. Multi-unit bridge cases are quoted individually at case submission. Phoenix metro deliveries ship via overnight carrier at no added freight cost for accounts above the minimum monthly case threshold.
What materials does Dani mill in-house, and who decides which material is used?
The in-house milling inventory covers monolithic zirconia in standard and high-translucency grades, layered zirconia, and IPS e.max CAD blocks. Material selection is driven by the clinical scenario captured in the case submission form, not by a default. The assigned technician reviews the case details before recommending a block grade. If the submitted prescription conflicts with the clinical scenario, the technician flags it before production, not after the restoration is cut.
How does Dani Dental handle remakes for milled restorations?
If a milled restoration does not seat, falls outside fit spec, or misses the agreed shade target, Dani remakes it at no charge and prioritizes return shipping. The remake commitment is stated on the case confirmation sent before production starts, not embedded in a separate terms document. Phoenix accounts do not need to open a dispute ticket; they call the technician who made the original case directly.
Can Phoenix practices reach the technician who designed their case directly?
Yes. Every case ships with the direct phone line of the technician who designed and reviewed it. Questions about shade, emergence profile, contact tightness, or occlusal adjustment go to that person. The target response window is same business day. There is no general support queue routing calls away from the person with case-specific knowledge.
Does Dani Dental serve same-day crown protocols for Phoenix dental offices?
Dani supports next-day and 72-hour single-unit protocols rather than in-office same-day milling. For practices that batch scans and need a reliable next-business-day option, the 72-hour rush track is available for cases confirmed before 10 a.m. Mountain time. Practices running true chairside same-day workflows with their own mill can use Dani for the cases that exceed their in-office capacity or material range.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician