1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Phoenix Porcelain-Fused-to-Metal Crown

Phoenix dentists ordering PFM crowns from Dani Dental work with a lab that treats metal-ceramic as a precision discipline, not a commodity unit. Every PFM starts with careful alloy selection: high-noble or noble alloys chosen against the clinical situation, not a single default metal tier applied to every case regardless of patient history or opposing dentition. The porcelain layer is hand-applied and fired in controlled increments to produce tight margin adaptation and shade accuracy that holds under the Arizona sun's color temperature, which matters when patients judge esthetics in natura...

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Phoenix dentists ordering PFM crowns from Dani Dental work with a lab that treats metal-ceramic as a precision discipline, not a commodity unit. Every PFM starts with careful alloy selection: high-noble or noble alloys chosen against the clinical situation, not a single default metal tier applied to every case regardless of patient history or opposing dentition. The porcelain layer is hand-applied and fired in controlled increments to produce tight margin adaptation and shade accuracy that holds under the Arizona sun's color temperature, which matters when patients judge esthetics in natura...

THE DETAIL

How we build it.

Most national-volume labs treat PFM crowns as a throughput item: prescriptions enter a queue, a unit ships, accountability ends there. Dani Dental assigns a named technician to each account, meaning the same set of hands reads your margin preferences, tracks your shade tendencies, and catches the deviations before the case ships rather than after the patient sits. That named-technician model is the structural difference between this lab and high-volume category labs running thousands of units per week through anonymous bench rotations. Communication is the second lever. Accounts that leave dental labs most often cite slow or absent communication as the trigger, not price. Every Dani PFM case ships with the direct contact for the technician who built it. Questions about shade matching, alloy selection, or a questionable margin go to that person, not a general support queue. Response windows are measured in hours, not business days. On price transparency: Dani does not use a procurement maze of add-on fees to obscure the real unit cost. PFM crown pricing is stated clearly at the account-setup stage, and any alloy upgrade or articulation request is quoted before production starts. For Phoenix practices managing overhead carefully in a competitive metro market, that clarity translates directly into predictable lab spend without end-of-month surprises.

GETTING CASES TO US

Logistics, to the bench.

Phoenix dentists ordering PFM crowns from Dani Dental work with a lab that treats metal-ceramic as a precision discipline, not a commodity unit. Every PFM starts with careful alloy selection: high-noble or noble alloys chosen against the clinical situation, not a single default metal tier applied to every case regardless of patient history or opposing dentition. The porcelain layer is hand-applied and fired in controlled increments to produce tight margin adaptation and shade accuracy that holds under the Arizona sun's color temperature, which matters when patients judge esthetics in natural light rather than operatory fluorescents. For posterior PFMs where strength is the primary driver, Dani's technicians build occlusal thickness to manufacturer-specified minimums and communicate any prescription ambiguity back to the prescribing doctor within one business day, not the end of the week. That direct line shortens the correction loop and keeps your chair schedule intact. For anterior cases where the metal collar is a concern, the team will flag alternative restorations proactively rather than build something that produces a call-back six months later. Phoenix metro pickup and delivery runs daily, and digital cases sent via intraoral scan before 2 p.m. MST enter the production queue the same afternoon. If you're moving from traditional impressions toward a fully digital workflow, the lab team can walk you through scan submission without an add-on consultation fee.

COMMON QUESTIONS

What practices ask

What alloys does Dani Dental use for PFM crowns sent from Phoenix practices?
Default cases use a high-noble alloy meeting ADA composition guidelines. Noble and base-metal options are available and quoted before production starts, not billed as a surprise on the invoice. If a patient history or opposing-dentition note in the prescription suggests a specific alloy, the assigned technician flags it before building rather than substituting silently.
How long does a standard PFM crown take from scan submission to delivery in Phoenix?
Standard turnaround is five business days from the day a complete, approved prescription and scan or impression is received. Rush cases can be accommodated in three business days for a stated rush fee. Phoenix metro accounts using the daily pickup-and-delivery route do not pay a separate courier charge on standard turnaround cases.
Can I submit PFM cases digitally instead of sending a physical impression?
Yes. Dani Dental accepts STL files from all major intraoral scanner platforms including iTero, 3Shape TRIOS, and Medit. Scans submitted before 2 p.m. MST enter the production queue the same afternoon. If you are transitioning from PVS to digital and have questions about scan protocol, the lab team will walk you through it at no additional charge.
What is Dani Dental's remake policy for PFM crowns that do not seat correctly?
Cases that do not seat due to a lab-side error are remade at no charge. The named technician on the account reviews the returned case, identifies the source of the issue, and documents the correction to prevent recurrence. The lab's trailing remake rate for PFM crowns across Arizona accounts is under 2.5%, tracked on a rolling 12-month basis.
Who do I contact if I have a shade or margin question after a PFM case ships?
Every case ships with the direct contact information for the technician who built it. Questions go to that person, not a general support queue. The target response window is the same business day for questions received before 3 p.m. MST. For complex shade or occlusion discussions, the technician can schedule a brief call rather than resolving it through message threads.
Is Dani Dental a good fit for a Phoenix practice transitioning away from PFMs toward full-zirconia crowns?
Yes. Dani Dental fabricates both PFM and monolithic zirconia crowns, and the assigned technician can discuss clinical trade-offs for specific cases without pressure to shift your entire case mix. Some clinical situations still favor PFM over monolithic zirconia. The lab's role is to give you accurate information on each case type, not to steer volume toward one material category.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician