1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Phoenix 3D-Printed Restoration

Phoenix dentists run busy schedules. Chair time is money, and a restoration that fits right the first time is not a bonus, it is the baseline expectation. Dani Dental's 3D-printed restoration workflow starts with your intraoral scan, accepts STL and DCM files from all major capture systems, and routes every case through a validated digital design step before a single layer of resin or zirconia is printed. No re-scanning. No ambiguous paper prescription. The file comes in, a technician reviews margins and contacts, and production starts.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Phoenix dentists run busy schedules. Chair time is money, and a restoration that fits right the first time is not a bonus, it is the baseline expectation. Dani Dental's 3D-printed restoration workflow starts with your intraoral scan, accepts STL and DCM files from all major capture systems, and routes every case through a validated digital design step before a single layer of resin or zirconia is printed. No re-scanning. No ambiguous paper prescription. The file comes in, a technician reviews margins and contacts, and production starts.

THE DETAIL

How we build it.

Most dental labs serving Phoenix fall into one of two categories: national-network operations where your case is one of several thousand processed that week with no named accountability, or smaller local shops that lack the digital infrastructure to handle full-arch printed workflows reliably. Dani Dental sits in neither bucket. The lab has run digital workflows since before most Phoenix-area practices owned an intraoral scanner, and that history shows in how the process is built, not how it is marketed. The named-technician model is the practical difference. When a Phoenix doctor submits a printed restoration case, one technician owns that case from design review through shipping. That technician's direct line is in the case confirmation email. If there is a margin question or a bite question, the call takes 90 seconds because the person answering actually worked the file. National-network labs route those calls through tiered support queues. The result, for practices that have switched to Dani from category-tier volume labs, is a measurable drop in remake requests and a shorter time-to-seat on complex printed cases. Three generations of bench experience inform how the digital side is calibrated. The Dobrikov family started in Sofia in 1988, moved the practice to Arizona in 1993, and has kept production in-house through every technology shift since. That means the technicians reading your scan file have also hand-stacked ceramic, adjusted occlusion on full-arch cases, and understand what a printed provisional has to do before the final goes to press. Digital is the workflow. Craft is the standard it is held to.

GETTING CASES TO US

Logistics, to the bench.

Phoenix dentists run busy schedules. Chair time is money, and a restoration that fits right the first time is not a bonus, it is the baseline expectation. Dani Dental's 3D-printed restoration workflow starts with your intraoral scan, accepts STL and DCM files from all major capture systems, and routes every case through a validated digital design step before a single layer of resin or zirconia is printed. No re-scanning. No ambiguous paper prescription. The file comes in, a technician reviews margins and contacts, and production starts. For Phoenix practices that have tried in-office milling, the ceiling is familiar: limited material libraries, machine downtime, and restorations that require heavy chairside adjustment. Dani's lab-grade printers hold tighter tolerances than benchtop chairside units, and the material selection covers printed PMMA provisionals, printed resin for diagnostic mock-ups, and printed surgical guides that feed directly into implant placement workflows. If a case calls for a printed provisional followed by a milled or pressed final, both phases move through the same case file and the same technician, so nothing falls through the handoff gap. Shipping from our Arizona facility to Phoenix zip codes runs same-day or next-morning depending on pickup cutoff, which means a 48-hour turnaround on most standard printed cases lands on your desk before you need to seat it. Rush windows are available at 24 hours for single-unit printed crowns when the scan arrives before noon. Every case ships with a direct technician line, not a general inbox.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for 3D-printed restoration cases?
Dani Dental accepts STL, DCM, and OBJ files from all major intraoral capture systems including iTero, Trios, Medit, and Carestream. If your scanner exports a proprietary format, contact the lab before submitting and a technician will confirm compatibility within one business hour. There is no fee for file format troubleshooting.
How long does a standard 3D-printed crown take to arrive at a Phoenix practice?
Standard turnaround is 48 hours from scan receipt to shipment for Phoenix-metro accounts. Arizona facility shipping to Phoenix zip codes runs same-day or next-morning, so most standard printed cases arrive within two business days of submission. A 24-hour rush option is available for single-unit printed crowns when the scan file arrives before noon on business days.
Can Dani Dental handle printed surgical guides in addition to restorations?
Yes. Dani Dental produces printed surgical guides that integrate with implant placement planning software. These cases move through the same digital design review as restorative cases, and the same named technician manages both the guide and any associated provisional or final restoration. CBCT data integration is supported for full-arch guide cases.
What materials are available for 3D-printed restorations?
The current material library covers printed PMMA for long-term provisionals, diagnostic resin for mock-ups and trial smiles, and printed resin frameworks for hybrid and implant-supported cases. Printed surgical guides are produced in biocompatible guide resin. For final restorations requiring pressed or milled ceramic, Dani Dental manages both the printed provisional phase and the final production phase under one case file.
What happens if a printed restoration does not fit correctly?
Dani Dental's named-technician model means the person who designed the restoration is also the first call if there is a seating issue. Remakes driven by lab error are covered without a procurement process. The lab's tracked remake rate across 3D-printed cases sits below 2.5%, but when a remake is needed, turnaround matches the original case window.
How does Dani Dental's pricing for 3D-printed restorations compare to in-house milling?
Lab-grade printed restorations from Dani Dental eliminate the capital cost of chairside milling equipment, the consumable cost of milling blocks, and the chair time spent on machine maintenance and case troubleshooting. Pricing is quoted per case with no volume minimums for Phoenix accounts. Contact the lab for a current fee schedule; a technician will provide a written quote within one business day.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician