1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Tempe Ceramic Inlay & Onlay

Tempe practices run a tight chair schedule. When a ceramic inlay or onlay case goes sideways , poor marginal fit, shade mismatch, an onlay cusp that contacts wrong , the downstream cost in chair time, impression retakes, and patient goodwill adds up fast. Dani Dental's ceramic inlay and onlay workflow starts with your digital scan or conventional impression and moves through feldspathic or lithium disilicate pressing, full-contour milling, and hand-characterization by a named technician. You know exactly who built the case.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Tempe practices run a tight chair schedule. When a ceramic inlay or onlay case goes sideways , poor marginal fit, shade mismatch, an onlay cusp that contacts wrong , the downstream cost in chair time, impression retakes, and patient goodwill adds up fast. Dani Dental's ceramic inlay and onlay workflow starts with your digital scan or conventional impression and moves through feldspathic or lithium disilicate pressing, full-contour milling, and hand-characterization by a named technician. You know exactly who built the case.

THE DETAIL

How we build it.

National-volume labs running thousands of units per day optimize for throughput. That model works for full-arch implant cases and single-unit PFM crowns where tolerances are wide. Ceramic inlays and onlays are different. The margins are tighter, the shade demand is higher, and the occlusal anatomy has to integrate with existing tooth structure rather than replace it wholesale. High-volume commodity labs route those cases through the same conveyor as their bulk crown work. Dani Dental does not. Regional lab networks operating across the Southwest often consolidate fabrication to a single hub facility, which means your Tempe case ships to another city, gets built by whoever is available that shift, and comes back with a generic return label. Dani's Arizona bench has been in continuous operation since 1993. The technician who mills and characterizes your inlay is reachable by name, by phone, on the day your case ships. That is not a customer-service script; it is the operational structure of a family-owned lab that has never outsourced production offshore. On price: Dani publishes case ranges upfront. No procurement maze, no volume-tier unlocks that only make sense at 200-unit monthly minimums. Tempe practices ordering five ceramic cases a month get the same transparent pricing as a multi-location group. And because the remake rate sits below 2.5%, the real cost per seated restoration , factoring in retake appointments, additional anesthetic, and patient scheduling friction , runs lower than the invoice number alone suggests.

GETTING CASES TO US

Logistics, to the bench.

Tempe practices run a tight chair schedule. When a ceramic inlay or onlay case goes sideways , poor marginal fit, shade mismatch, an onlay cusp that contacts wrong , the downstream cost in chair time, impression retakes, and patient goodwill adds up fast. Dani Dental's ceramic inlay and onlay workflow starts with your digital scan or conventional impression and moves through feldspathic or lithium disilicate pressing, full-contour milling, and hand-characterization by a named technician. You know exactly who built the case. Every restoration is checked against your prep photos and opposing scan before it ships. If the contact or margin reads off at the bench, we flag it before you seat it , not after. That single step is what holds the remake rate below 2.5% for metro Phoenix accounts. Tempe clinicians ordering through Dani receive a direct technician line for case-specific questions, with responses in hours, not the following business day. Material selection is part of the intake conversation, not an afterthought. E.max press, zirconia-reinforced lithium disilicate, and layered feldspathic options each carry different translucency and wear profiles. We match material to tooth position, occlusal load, and shade zone , then document the selection so your next case in the same patient starts from a known baseline, not a guess.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for Tempe inlay and onlay cases?
We accept STL, PLY, and OBJ exports from all major intraoral scanner platforms, including iTero, 3Shape TRIOS, Carestream, and Medit. Conventional PVS or polyether impressions are also accepted and poured in-house. If your Tempe practice is transitioning from analog to digital workflow, we can handle both simultaneously during the switch without a gap in turnaround.
Which ceramic materials are available for inlay and onlay cases?
Standard options include IPS e.max press (lithium disilicate), zirconia-reinforced lithium disilicate, and layered feldspathic ceramic for anterior cases requiring high translucency. Material selection is confirmed during intake based on tooth position, occlusal load, and shade zone. We document the material choice per patient so follow-up restorations start from a consistent baseline.
What is the standard turnaround for a ceramic inlay or onlay from a Tempe practice?
Standard queue is five to seven business days from scan or impression receipt to case shipped. Rush queue (three business days) is available for an additional fee and must be confirmed at submission. Same-day or next-day turnaround is not offered for ceramic inlays and onlays, as hand-characterization and quality check steps cannot be compressed without affecting fit accuracy.
How does Dani Dental handle a case that does not seat correctly?
Any case that does not seat as prescribed is remade at no charge. The remake rate for ceramic inlay and onlay cases across metro Phoenix accounts, including Tempe, has held below 2.5% over the trailing 12 months. When a remake is initiated, the named technician who built the original case reviews the prep photos and opposing model before rebuilding, not a different tech starting cold.
Can a Tempe practice reach the technician directly rather than going through a customer service queue?
Yes. Every Dani Dental account includes direct technician contact information on the case packing slip. For shade questions, occlusal concerns, or prep feedback, you call or text the technician by name. Responses are returned within four business hours. There is no general support queue routing for active case questions.
Does Dani Dental offer shade consultations before a case is submitted?
Pre-submission shade consultations are available for complex anterior inlay cases where adjacent restorations, existing veneers, or bleached enamel create matching challenges. Send prep photos and a VITA or Vita Linearguide reading and the technician will confirm material and layering approach before you take the final impression or scan, reducing the risk of a shade remake on delivery.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician