1243 E Broadway Rd, Tempe AZ · (480) 449-09093433 E Ft Lowell Rd, Tucson AZ · (520) 795-7970
Customer PortalSend a Case

SERVICE

Tucson E.max Lithium Disilicate Crown

Tucson practices running a high anterior aesthetic caseload need a lab that understands e.max is a material system, not just a press blank. Dani Dental works with IPS e.max CAD and IPS e.max Press, selecting the workflow based on case geometry, translucency demands, and prep depth. For thin veneered laterals or high-translucency centrals, Press gives the optical gradient you cannot reliably mill. For posterior single units with tight occlusal clearance, CAD/CAM keeps the wall thickness consistent. Your case gets routed to the right workflow before production starts, not after a remake.

  • Pre-paid two-way shipping, nationwide
  • A named technician on every case
  • Margins verified against your prescription
  • Tempe + Tucson locations

THE SERVICE

Built to your prescription.

Tucson practices running a high anterior aesthetic caseload need a lab that understands e.max is a material system, not just a press blank. Dani Dental works with IPS e.max CAD and IPS e.max Press, selecting the workflow based on case geometry, translucency demands, and prep depth. For thin veneered laterals or high-translucency centrals, Press gives the optical gradient you cannot reliably mill. For posterior single units with tight occlusal clearance, CAD/CAM keeps the wall thickness consistent. Your case gets routed to the right workflow before production starts, not after a remake.

THE DETAIL

How we build it.

Most national-network labs route e.max cases through a centralized production floor where the technician assigned to your case changes case to case. You do not get continuity on shade matching, and when something needs adjustment, the feedback loop runs through a customer service layer that does not sit at the bench. Dani Dental assigns a named technician to your account. That technician reviews your prep photos, builds the crown, and is reachable by direct line through try-in. The accountability is structural, not a marketing claim. Regional dental supply distributors often refer Tucson dentists toward high-volume commodity labs for e.max work because the ordering integration is frictionless. Frictionless ordering does not equal precise shade architecture or case-specific translucency selection. Dani's workflow starts with a case review, not an order form. Anterior cases get a pre-production shade consultation; posterior cases get a material and thickness check before pressing or milling begins. That 20-minute front-end investment is what keeps the remake rate under 2.5%. Dani Dental has operated continuously since 1993 in Arizona, with bench technicians who have worked e.max since the material's North American commercial introduction. That is not a heritage pitch. It is a signal that the shade intuition, pressing protocol adjustments, and crystallization timing built into every case come from years of iterative production, not from a training manual distributed to a rotating lab workforce.

GETTING CASES TO US

Logistics, to the bench.

Tucson practices running a high anterior aesthetic caseload need a lab that understands e.max is a material system, not just a press blank. Dani Dental works with IPS e.max CAD and IPS e.max Press, selecting the workflow based on case geometry, translucency demands, and prep depth. For thin veneered laterals or high-translucency centrals, Press gives the optical gradient you cannot reliably mill. For posterior single units with tight occlusal clearance, CAD/CAM keeps the wall thickness consistent. Your case gets routed to the right workflow before production starts, not after a remake. Tucson's patient demographic skews toward long-term residents with existing PFM restorations that are aging out. That means a lot of e.max replacement cases where shade matching to adjacent natural dentition or existing porcelain is the primary clinical challenge. Every crown ships with a shade map and the direct line of the technician who built it. If the try-in reveals a value shift or a translucency mismatch, that technician picks up the phone. No ticket system, no anonymous support queue. Intraoral scan files from iTero, 3Shape TRIOS, and Medit are accepted directly. No PVS impression required unless you prefer the analog workflow. Scan-to-production time is under 24 hours from file acceptance. If you are transitioning your Tucson practice toward a fully digital crown workflow and want to pilot with e.max before committing to a full protocol change, Dani's Doctor Kit includes case-selection guidance, shade tab reference materials, and prep guidelines specific to lithium disilicate.

COMMON QUESTIONS

What practices ask

What file formats does Dani Dental accept for Tucson e.max crown cases?
STL, OBJ, and DCM files from iTero, 3Shape TRIOS, and Medit scanners are all accepted directly. Upload through the secure case portal and production review begins within 24 hours of file acceptance. If you prefer analog, PVS or polyether impressions ship to our Arizona facility with pre-paid packaging included in the Doctor Kit.
How does Dani Dental handle shade matching for anterior e.max cases in Tucson?
Every anterior e.max case gets a pre-production shade consultation with the assigned technician. You submit prep photos, adjacent tooth photos under consistent lighting, and your VITA or Ivoclar shade selection. The technician reviews before pressing or milling starts, not after. If the try-in reveals a value or chroma discrepancy, the same technician handles the adjustment. Response time on shade questions is under 3 business hours.
What is the standard turnaround time for an e.max crown from a Tucson practice?
Standard production schedule is 5 business days from scan acceptance or impression receipt. Rush turnaround of 3 business days is available for single-unit cases; contact the assigned technician to confirm availability before scheduling the prep appointment. Multi-unit anterior cases may require an additional day for shade gradient work.
Does Dani Dental use Press or CAD/CAM for e.max crowns?
Both. Workflow selection is case-driven. IPS e.max Press is used for high-translucency anterior cases, thin veneered restorations, and situations where the optical gradient matters most. IPS e.max CAD/CAM is used for posterior single units with tight clearance and cases where wall thickness consistency is the priority. The technician assigns the workflow during the case review, before production starts.
What is Dani Dental's remake policy for e.max crowns?
If a crown does not seat correctly or a shade is outside the agreed range at try-in, Dani remakes it at no charge. The remake is handled by the same named technician who built the original, using the try-in feedback directly. Internal remake rate is tracked at under 2.5% across lithium disilicate cases on a rolling 12-month basis.
How do I get started sending e.max cases from my Tucson practice to Dani Dental?
Request the Doctor Kit. It includes e.max prep guidelines specific to lithium disilicate clearance requirements, shade tab reference materials, case submission instructions for both digital and analog workflows, and direct contact for your assigned technician. No sales call required. Most Tucson practices complete their first case within 5 business days of kit receipt.

REQUEST A DOCTOR KIT

Try the work before you switch.

Request a Doctor Kit and we'll mail RX pads, a shade guide, and pre-paid shipping for your first three cases. No call, no contract.

Request a Doctor KitTalk to a technician